# File generated by anaconda.

Section "ServerLayout"
        Identifier     "Anaconda Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Mouse1" "SendCoreEvents"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
    FontPath   "unix/:7100"

EndSection

Section "Module"
#        Load  "GLcore"
        Load  "dbe"
        Load "extmod"
#        SubSection  "extmod"
#		Option	"omit xfree86-dga"
#	EndSubsection
#	Load "fbdevhw"
#	Load "pex5"
#	Load "dri"
        Load  "glx"
#        Load  "pex5"
#        Load  "record"
#        Load  "xie"
	Load "type1"
	Load "freetype"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "keyboard"

#	Option	"AutoRepeat"	"500 5"

# when using XQUEUE, comment out the above line, and uncomment the
# following line
#	Option	"Protocol"	"Xqueue"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
	Option	"XkbRules"	"xfree86"
	Option	"XkbModel"	"pc105"
	Option	"XkbLayout"	"us"
	#Option	"XkbVariant"	""
	#Option	"XkbOptions"	""
EndSection

Section "InputDevice"
	Identifier	"Mouse0"
	# Modified by mouseconfig
	Driver		"mouse"
	Option		"Device"		"/dev/psaux"
	Option		"Protocol"		"IMPS/2"
	Option		"Emulate3Buttons"	"no"
	Option		"Buttons"		"5"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "InputDevice"
	Identifier	"Mouse1"
	Driver		"mouse"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"IMPS/2"
	Option		"Emulate3Buttons"	"no"
	Option		"Buttons"		"6"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
        HorizSync   31.0-57.0
        VertRefresh 50.0-90.0

        # -- 1400x1050 --
        # 1400x1050 @ 60Hz, 65.8 kHz hsync
#        Modeline "1400x1050"  129   1400 1464 1656 1960
#                              1050 1051 1054 1100 +HSync +VSync

        # 1400x1050 @ 70Hz, 76.8 kHz hsync
#        Modeline "1400x1050"  151   1400 1464 1656 1960
#                              1050 1051 1054 1100 +HSync +VSync

        # 1400x1050 @ 75Hz, 82.3 kHz hsync
#        Modeline "1400x1050"  162   1400 1464 1656 1960
#                              1050 1051 1054 1100 +HSync +VSync

        # 1400x1050 @ 85Hz, 93.2 kHz hsync
#        Modeline "1400x1050"  184   1400 1464 1656 1960
#                              1050 1051 1054 1100 +HSync +VSync

EndSection

Section "Device"
	# no known options
	Identifier   "NVIDIA GeForce 2 (generic)"
        VendorName   "NVIDIA GeForce 2 (generic)"
        BoardName     "NVIDIA GeForce 2 (generic)"
	Option	"NvAgp" "1"        
        Driver       "nvidia"

#    BusID       "PCI:1:0:0"

    # sample twinview setup
    Option "TwinView"
    # be sure to replace the HorizSync and VertRefresh with correct values
    # for your monitor!  
    Option "SecondMonitorHorizSync"   "31-57"
    Option "SecondMonitorVertRefresh" "50-90"
    Option "TwinViewOrientation"      "RightOf"
    Option "MetaModes"                "1024x768,1024x768"
    Option "ConnectedMonitor"         "crt,crt"

EndSection

Section "Screen"
	Identifier   "Screen0"
        Device       "NVIDIA GeForce 2 (generic)"
        Monitor      "Monitor0"
	DefaultDepth	24

	Subsection "Display"
        	Depth       8
                Modes       "640x480" 
	EndSubsection

	Subsection "Display"
        	Depth       16
                Modes       "640x486" 
	EndSubsection

	Subsection "Display"
        	Depth       24
                Modes       "1024x768" 
	EndSubsection

	Subsection "Display"
        	Depth       32
                Modes       "1024x768" 
	EndSubsection

EndSection

#Section "DRI"
#	Mode 0666
#EndSection